Houser foot peg/heel guard are .75" lower than stock for the YFZR. For the ultimate comfort go with the gytr nerf bar/pegs. They are 1.25" lower than stock pegs.
Yfz450r foot pegs
Searched but couldent find a solid answer. So im looking to get some nice foot pegs with heel guards before my trip to glamis. I'm pretty tall so im looking for some that are lower than my stock ones for a little more comfort. I ride desert and dunes a lot so im looking for a good build quality pair. Thanks guys
1 - 8 of 8 Posts
I was told that they were higher than stick because the pivot joint makes them sit higher . Any links to the gytr footpegs 1.25 inches sounds more comfortable ? Are they available for just the heel guard and peg or do I have to buy the full nerf bars ?Houser foot peg/heel guard are .75" lower than stock for the YFZR. For the ultimate comfort go with the gytr nerf bar/pegs. They are 1.25" lower than stock pegs.
Can the ballance pro racing pegs be used with the stock heel guards if I modify the mounts?
I have the ballance pro pegs with the stock heel guards on. Didnt modify anything. Th holes on the stock heel guards line up perfect with the upper holes on the ballance pegs. At least on th 14' model.Can the ballance pro racing pegs be used with the stock heel guards if I modify the mounts?
I wonder if they are the same if that's thr case I'll order a pair this week from tqsatv.I have the ballance pro pegs with the stock heel guards on. Didnt modify anything. Th holes on the stock heel guards line up perfect with the upper holes on the ballance pegs. At least on th 14' model.
I had originally bought the 9' - 13' model ballance pro pegs and heel guards but when I went to put the heel guards on they rubbed on the 14 plastic. The mounting points all lined up but the newer plastic is lower. That's the reason I left the stock heel guards on. I don't see why it shouldn't work on a 13' model unless the stock pegs are completely different from the 14' model.I wonder if they are the same if that's thr case I'll order a pair this week from tqsatv.
I'll just order them im sure I can tweek them to fit it i have any problemsI had originally bought the 9' - 13' model ballance pro pegs and heel guards but when I went to put the heel guards on they rubbed on the 14 plastic. The mounting points all lined up but the newer plastic is lower. That's the reason I left the stock heel guards on. I don't see why it shouldn't work on a 13' model unless the stock pegs are completely different from the 14' model.
1 - 8 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
YFZ Central
A forum community dedicated to Yamaha YFZ owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance, classifieds, and more!
Full Forum Listing
Recommended Communities
