YFZ Central banner
1 - 9 of 9 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 · (Edited)
I just orderd from yamaha oem part's a connecting rod , from what i understand the rod is 3 part's , in the script from yamaha site its number 4,5,6

1. connecting rod
2. crankpin
3. bearing


but when i look for complete set like prox \ hotrods the have included :

1.connecting rod
2.crankpin
3.big-end bearing
4.small end bearing
5.thrust washers

i missing something?

http://www.yamahapart.com/oemparts/a/yam/50039d6bf870021f60a1105f/crankshaft-piston

http://www.amazon.com/dp/B003O6WZE6...UTF8&colid=1B2I2D30ILVIB&coliid=IH7JB7OP40BS2
 

·
Registered
Joined
·
219 Posts
small end bearing and thrust washers are only for certain models. i think you can get a whole new crank for like $150 more, and you dont have to get the rod installed. which normally runs $100 or so.
 

·
Registered
Joined
·
155 Posts
I looked up the part # for a 05 and part # for a 12
when trying to cross reverence look up part #s and see if other years use the same.
part # 18P-26335-00-00 is for a 12 and the 05 is 5TG-26335-00-00 so I do not know if it is the same, only the first 3 # are different.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top