its an old camera. Its about 3 years old actually..its an olympus C-3000Z. You can PROBABLY still pick it up, not sure. its 3.3 megapixels so its plenty. Check out www.dpreview.com for tons of digi camera reviews and stuff.
Here ya go! When your installing the nerfs onto the pegs, from the pic you can see you will need to add two spacers to the screw to make it flush up and such. It took me awhile to figure that out because the nut from the stock foot guards was in the way.
thanks for that pic. i was looking to see how far down from the peg the net starts. if you look at propegs, the nets come off the top of the peg and its like flush together(thats how i like it) most nerf bars, the bolts go through the pegs, and the net starts below that - like 1" and 1/2 down from the peg(i dont like that)
btw, i would bought arens to support them, but thats not how i like my nerfs... :|
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.