YFZ Central banner
1 - 4 of 4 Posts

·
Registered
Joined
·
238 Posts
Back off the nut you see. Then up from there where the shaft goes into the master cylinder there's spot for a wrench turn that and it will go up and down tighten the bottom nut after it's where you want it to lock in place. I have factory 43 nerfs and I fine I max the adjustment out you can take it off and cut the threads for more adjustment of needed. One you get into it you'll see what I mean
 

·
Registered
Joined
·
238 Posts
That’s awesome dude, thanks for the detailed info!! I’m glad to hear it’s something simple to get it adjusted. You said you have yours maxed out, does that work well enough for you or do you plan to cut it down so the pedals even further down?
Mines maxed out. the tread is touching the brake pedal and its flush with pegs. If you want it lower you'll have to cut.
 
1 - 4 of 4 Posts
Top