YFZ Central banner
1 - 3 of 3 Posts

· Registered
Joined
·
19 Posts
they look close to the +2 Alaba Racing A Arms that I have but there are some differences like the lower A arms in your picture yours has 2 little extra tubes that are at a 45 degree angle next to the shock connection point and another thing I noticed in your pic is your upper ball joint is adjusted near all the way out and thats a red flag as per alba they should be adjusted all the way in or close to and thats what i got directly from alba with my own as something to look out for and to my knowledge if the were alba Arms your upper ball joint should be near all the way in when its adjusted hence stronger when adjusted and you have to run them out like in your pic that connection becomes weaker maybe there some older Alba ???
 

· Registered
Joined
·
19 Posts
I found them I believe yours are ishock i3500 +2inch phantoms I was comparing your in pic to other A arms and there a Perfect match look up the ishock i3500 +2 inch phantom front A arm and you will see a perfect match to yours
 
1 - 3 of 3 Posts
Top