YFZ Central banner

help

684 views 1 reply 2 participants last post by  OffRoadAce 
#1 ·
hey i have my carb tore apart right now putting new jets in how do i get the stock needle out? i got the new jets put in 45 pilot and 165 main now i jsut need to put this spare part needle in and pu tthe clip 3 from the top and it should rip.
 
#2 ·
Put the bottom back together and flip it over.
Take the top cover off.
(going from memory) You will see 2 allen screws.
Move the throttle on/off to see which one moves. That is the one you need to remove.
This is where the needle is. Be sure not to lose the spring.
Take the needle out, change the ring, put it back in andclose it up.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top