YFZ Central banner
1 - 20 of 21 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
First off yes I have read all the cam mod topics!

Just wondering if guys running gncc or xc/hare scrambles didn't like the cam mod.
Did it make low speed/low rpm sections tougher? Any low rpm power loss? Hot starts take longer? Thanks

I have an 08 w a hmf exhaust, run no air box lid,170 main/45 pilot, r&d adjustable fuel screw, quick shot 3 and it just perfect now I'm just on the fence bout doing the cam mod
 

·
Registered
Joined
·
1,117 Posts
I disagree.Its all in the jetting and make sure your battery is good.Mine fires instantly and the Cam mod had No affect other than the bike runs so much better8)
 

·
Registered
Joined
·
202 Posts
I would say -25% slower

:lol
 

·
Registered
Joined
·
202 Posts
By the way -25% slower IS faster !!

and 25 may not be enough

it pulls harder trough the rpm range, If you stall it while riding it hard you have to wait 10-15 sec before it starts up, will start instantly after that.
I did this mod to my YFZ when is was almost new so I am not sure if its worse or not.
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top