[YFZ450~Rob]

anyone know who makes front rims to fit the yfz in a 4+1 offset

 

[woodwardspecialties]

so far i have not seen any available in the yamaha bolt pattern....

for the yfz here at the shop we put on baldwin hubs to change to the honda pattern, and put on honda 4 in 1 wheels.

 

[Sick4Fitty]

i got some from RaptorGurl off BlueTraxx they fit my YFZ but i sold them they were to wide...i think her name on here in YFZ#43 ask her.....i have pics of them on the 450

http://www.tamparacing.com/forums/attachme...=&postid=861760
http://www.tamparacing.com/forums/attachme...=&postid=861758
http://www.tamparacing.com/forums/attachme...=&postid=983125

 

[EX 80]

Whats so uncommon with 4+1 offsets for a YFZ!?!!? I went to k and k and they are an every day item they stock. Ones i got are Douglas Ultimate rolled edge.

 

[woodwardspecialties]

i know i dont have them in my catalogs....
and i checked with a few distributors that didtn carry them. so i never called douglas or anyone...

 

[YFZCentral]

I got douglas 4+1's coming in this week......

 

[YFZ#43]

Originally posted by Sick4Fitty@Jan 27 2004, 10:19 PM
i got some from RaptorGurl off BlueTraxx they fit my YFZ but i sold them they were to wide...i think her name on here in YFZ#43 ask her.....i have pics of them on the 450

http://www.tamparacing.com/forums/attachme...=&postid=861760
http://www.tamparacing.com/forums/attachme...=&postid=861758
http://www.tamparacing.com/forums/attachme...=&postid=983125

Those were not 4+1, the 4+1 narrow the wheelbase giving you more precise steering. I have only seen the 4+1 avail from douglas but I never really looked hard for them.

 

[YFZ450~Rob]

Thanks for the help
:yfz

 

[CTYfzrider]

Hiper has them

 

[petersonracing]

What's the deal? I am running ITP T9 in a 2+3 offset (2 out, 3 in) with Klaw MXF's, and the stock frontend is measuring just under 46". If I go with +2 arms I should be right under the 50" limit. With a 4+1 wheel wouldn't that narrow the front end another 2" overall, requiring the use of +3 arms to get to the limit? The reason I ask it because Walsh and some others are making +2.5 arms and it doesn't seem as though that would get me to 50". Anybody know?

 

[CTYfzrider]

Walshs + 2.5 a arms and 4-1 offset hipers will put me right at 50"

 

[cjpoole1]

Originally posted by CTYfzrider@Jan 28 2004, 06:49 AM
Hiper has them

not in a yamaha bolt pattern

 

[woodwardspecialties]

Originally posted by cjpoole1+Jan 28 2004, 03:21 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (cjpoole1 @ Jan 28 2004, 03:21 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin--CTYfzrider@Jan 28 2004, 06:49 AM
Hiper has them

not in a yamaha bolt pattern [/b][/quote]
that is correct... Hiper DOES NOT have them in the yamaha bolt pattern!
i am a hiper dealer... trust me ... they DO not have them

only avail. in the honda bolt pattern... thats why we used baldwin hubs on the front of the yfz here, so we could mount 4 in 1 honda pattern hipers on there.

 

[XCyFz]

way i understood hipers were 3.5+1.5 instead of really 3+2

 

[CTYfzrider]

does hiper plan on making 4+1 in yammi pattern? i don't have money to go buy some damn hubs and then rims.

 

[stupidfast]

Golden west cycle has 4-1 yami wheels in douglas ultimates or Itp t9 and t9 baja for $89 to $99. Also James lucky has douglas ultimates for $79. jlatvproducts.com and goldenwestcycle.com 8)