YFZ Central banner

1 - 6 of 6 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
Looking for some help. I bought a 2006 raptor 350 for my wife. It had a bent frame so I pulled the motor and had it repaired.


I put it back together and the it would not run.


I had it at a small shop and the mechanic told me that the timing was off 180 degrees?? During the time he was trouble shooting it he had to shut his shop down..


Getting ready to tackle this myself so looking for a good starting point or list of things to start checking.
Thanks
 

·
Registered
Joined
·
65 Posts
Discussion Starter #2 (Edited)
Went through the carb today and cleaned it all out, made sure it was getting fuel.


Also checked spark and spark is good
She wont fire now...
 

·
Super Moderator
Joined
·
3,098 Posts
It's turning over but won't fire?
 

·
Registered
Joined
·
65 Posts
Discussion Starter #6
Still working things out with no results.. Maybe videos will help with getting some suggestions.


Also bought a compression tester the pic with 65 psi is with the throttle closed. With the throttle wide open she's getting 120 psi..
<a href="D4A8C131-838A-4008-924D-AEC6FFAA8CD9_zpskl12cbm1.jpg Photo by kjohnsiii | Photobucket" target="_blank"><img src="http://i740.photobucket.com/albums/xx45/kjohnsiii/th_D4A8C131-838A-4008-924D-AEC6FFAA8CD9_zpskl12cbm1.jpg" border="0" alt=" photo D4A8C131-838A-4008-924D-AEC6FFAA8CD9_zpskl12cbm1.jpg" style=""></a>
<a href="4D8FC630-0531-4B70-B75A-9A9EE288C7E1_zpsrz5zrs61.jpg Photo by kjohnsiii | Photobucket" target="_blank"><img src="http://i740.photobucket.com/albums/xx45/kjohnsiii/th_4D8FC630-0531-4B70-B75A-9A9EE288C7E1_zpsrz5zrs61.jpg" border="0" alt=" photo 4D8FC630-0531-4B70-B75A-9A9EE288C7E1_zpsrz5zrs61.jpg" style=""></a>




https://www.youtube.com/watch?v=_sWZSFNUUbc


https://www.youtube.com/watch?v=0pEhXNfT0GU
 
1 - 6 of 6 Posts
Top