09 Yfzr Updated Pics

6054 Views 18 Replies 12 Participants Last post by 02raptor_rider, Mar 25, 2009

02raptor_rider

Discussion Starter · Mar 13, 2009

8

Hey guys,
Just thought I would show some updated pics of my yfzr. I finally got my rath nerfs, fox rear shock, and quad tech seat cover on. The front fox shocks are from an 08 yfz that had houser a arms. They are 18 1/2. The stock yfzr fronts are 18 1/4. I had to file down one of the upper spacers to get them in the frame. Don't mind the bent bumper! Still waiting on the rest of my rath stuff. Here are the pics.

Notice how I had to mount the heelguard on this side. I made spacers to go between the master cylinder and guard. The heelguard was originally hitting the pipe.

Here is the clearance from the rear shock rezzie to the pipe. Fox made it kind of like a piggy back. It still has a short hose, but it just clamps around the shock body. The rezzie is also mounted upside down so you can get to the adjustment.

You can kind of see how it mounts in this pic.

That's it for now. Let me know what you think!

P.S. If anyone knows of a good dyno tuning shop somewhere near eastern PA, let me know.

See less See more

1 - 19 of 19 Posts

82SOCOM

· #2 · Mar 13, 2009

Looks awsome man! How are you liking the yfzr?

j1o2e3

· #3 · Mar 13, 2009

thats a sick yfzr you got there.

02raptor_rider

Discussion Starter · #4 · Mar 13, 2009

QUOTE (82SOCOM @ Mar 13 2009, 08:10 AM) index.php?act=findpost&pid=757323

Looks awsome man! How are you liking the yfzr?[/b]

I love it! So far it has been great. I would like it a little bit wider in the front. With the 4-1 wheels it is only like 48 1/4 inches wide. I am going to be putting on some burgard long travels. That should get it out over 49 inches. They will also let me fit some 20" shocks on there!

CADWELL

· #5 · Mar 13, 2009

Looks really good man, it's come a long way in such a short period of time. The nerf bars look great on there especially with the black PC.

I thought you were gonna wait for Walsh?

02raptor_rider

Discussion Starter · #6 · Mar 13, 2009

QUOTE (CADWELL @ Mar 13 2009, 08:54 AM) index.php?act=findpost&pid=757338

Looks really good man, it's come a long way in such a short period of time. The nerf bars look great on there especially with the black PC.

I thought you were gonna wait for Walsh?[/b]

Thanks man! I was waiting for your reply, lol. I think it will look a lot better when I get the bumper as well.

I was going to wait for walsh, but ran into some financial issues. Also, they still don't have a date yet for me on when anything would be available. I am heading to alabama next week and wanted to get stuff on there. Burgard is really willing to help me out. Izzy said my arms and stem should be done monday or tuesday. They have been great to me so far so I want to return the favor and get them some good results!

CADWELL

· #7 · Mar 13, 2009

I've been waiting to see your RATH stuff man, I'm a big fan lol.

Overall it looks like you've made great choices in the direction you're going with for MX. That Podium set-up is pretty trick with that bracket like that, the only thing I question is fading because of the heat coming off the exhaust. I'm sure FOX was on top of that though because of all the R&D they put in to their product.

I can't blame you for not waiting for Walsh. With the season in full swing now, it'll probably take a little longer now for them to get their products out. Also I've heard of Burgard ramping their customer service up so why not give them the benefit of the doubt right?

Good luck man.

1socal450

· #8 · Mar 13, 2009

Nice setup,now all you have to do is CUT THOSE FENDERS!!!!!! I love the Fox shocks on the stock arms,I think I might do the same.

02raptor_rider

Discussion Starter · #9 · Mar 14, 2009

Thanks guys. I am really happy with the way it is turning out!

Don't look for any cut fenders here. Not my style. I have never liked cut fenders.

yfzrider718

· #10 · Mar 14, 2009

QUOTE (02raptor_rider @ Mar 14 2009, 03:33 PM) index.php?act=findpost&pid=757804

Thanks guys. I am really happy with the way it is turning out!

Don't look for any cut fenders here. Not my style. I have never liked cut fenders.[/b]

lol i was just about to say you should cut the fenders. i think the fenders on the yfzR are a bit to big. it looks sick though man.

02raptor_rider

Discussion Starter · #11 · Mar 25, 2009

3

Some more pics! Got my burgard long travel a arms and steering stem installed. I also got the precision pro from kb motorsports. Rath bumper also came. I still have to get my streamline brake lines installed. Check it out.

See less See more

smith10

· #12 · Mar 25, 2009

Bike looks hot! i like!

cwright#26

· #13 · Mar 25, 2009

... Wow seeing that makes me want one more than before lol

gtilley45

· #14 · Mar 25, 2009

Bike looks good.

I think I saw you in line for tech inspection at the Alabama national. You're the only one who has those graphics aren't you?

spilldathrill

· #15 · Mar 25, 2009

Bike looks great! [attachment=5496:leghmp.gif]

See less See more

Transplanted

· #16 · Mar 25, 2009

Wow, bike looks great!

younggun95

· #17 · Mar 25, 2009

I can't wait to see mine after I get my graphics, and long travels put on!

CADWELL

· #18 · Mar 25, 2009

Man that wheeler is looking better and better with every pic you share :clap: .

02raptor_rider

Discussion Starter · #19 · Mar 25, 2009

QUOTE (gtilley45 @ Mar 25 2009, 10:32 AM) index.php?act=findpost&pid=762007

Bike looks good.

I think I saw you in line for tech inspection at the Alabama national. You're the only one who has those graphics aren't you?[/b]

Yeah, I am the only one with those graphics. I wanted to pm you before I came down but I forgot. I would have liked to meet ya.

Thanks everybody. I have been putting a lot of time and work into it. As well as beating the crap out of it! I think it is pretty much done now. I am ordering the new wheel kit from douglas so it will have black wheels. I will post some more pics when I get those!

1 - 19 of 19 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.