[ccalhoun29]

Ok guys need a lil insight. I have noticed on two 04's & one 05 that I have been around that right front camber is leaning in towards the bike and the left does not. I have seen several 08's and they are not leaning in. Is that something the factory did on those bikes?

 

[cloudpump]

mine doesn't lean

 

[ccalhoun29]

What year is yours?

 

[cloudpump]

its an 05

 

[linkedxj]

Both sides should be the same unless they are set up for circle track or something.... Were all three bikes on level ground?

 

[ccalhoun29]

Yes they were on a cement floor. It's not a significant lean but I noticed the right to lean ever so slightly. If I get a chance I will take a pic and post it.

 

[deters003]

Ball joints may be bent

 

[dweible64]

will 04-05 a-arms and a shock be a bolt-in replacement for a 2006 yfz450se? One side got damaged after a jump and being bucked off. Whoops. Any info would be appreciated. Would i have to do both sides? :-(

 

[dweible64]

will 04-05 a-arms and a shock be a bolt-in replacement for a 2006 yfz450se? One side got damaged after a jump and being bucked off. Whoops. Any info would be appreciated. Would i have to do both sides? :-(