Yamaha YFZ450 Forum : YFZ450, YFZ450R, YFZ450X Forums

Yamaha YFZ450 Forum : YFZ450, YFZ450R, YFZ450X Forums (https://www.yfzcentral.com/forum/)
-   YFZR-X Powertrain (https://www.yfzcentral.com/forum/86-yfzr-x-powertrain/)
-   -   Winter build (https://www.yfzcentral.com/forum/86-yfzr-x-powertrain/259938-winter-build.html)

Sheerider11 10-05-2016 11:17 PM

Winter build
 
With winter quickly approaching, I'm going to have some down time.
So despite my effort, the 450 is on the chopping block.
So for starters I'm going to get a

Yoshi exhaust.
Robl intake
08 yz450f cam
Slhg

Now if I have the head off, should I get it ported?
I use the bike to do it all. Trail,mx,xc,Dune, open pit style riding.

I don't know how it works with these bikes, but I dont know if they have names for a different port style. Like a Dune port, mx port, etc.

Pump gas is a must.

I want to do fairly cheap mods, as I want to focus more on the chassis. So the 4 minus the porting is all about 1k. Which isn't all that bad if I spread it out over a few months. But if I'm in there, I'd want to do it once and not deal with it for a while

Sent from my SAMSUNG-SM-G890A using Tapatalk

spinothalamic 10-06-2016 06:08 PM

What's the hype with the single layer head gasket? I hear about it a lot but don't understand why its desired? Mixxer is the person to PM for porting questions. Should be a nice build

kilroy 10-06-2016 06:41 PM

If you have it apart I would port for pump gas!

Sheerider11 10-06-2016 06:45 PM

Quote:

Originally Posted by spinothalamic (Post 2170218)
What's the hype with the single layer head gasket? I hear about it a lot but don't understand why its desired? Mixxer is the person to PM for porting questions. Should be a nice build

I don't know. Just seen its a free mod good for some power.
So I'm all about it. Maybe I'll look into it more

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-06-2016 07:01 PM

Quote:

Originally Posted by kilroy (Post 2170226)
If you have it apart I would port for pump gas!

Hmm.
What's the scoop on that?
And who is doing the best one? I need to call a few places.
The sponsors here are only retailers. I don't know any shops in the FI four stroke business

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-06-2016 07:02 PM

Quote:

Originally Posted by kilroy (Post 2170226)
If you have it apart I would port for pump gas!

Hmm.
What's the scoop on that?
And who is doing the best one? I need to call a few places.

I just looked.
The sponsors here are only retailers. I don't know any shops in the FI four stroke business.
I see stuff for epoxy and stuff like that.

Sent from my SAMSUNG-SM-G890A using Tapatalk

kilroy 10-06-2016 07:09 PM

Mmad, OCP, Moto-Xperts.

Sheerider11 10-06-2016 09:06 PM

Quote:

Originally Posted by kilroy (Post 2170258)
Mmad, OCP, Moto-Xperts.

I was also looking at dasa.
I am also looking for info on ryan cox.
Just trying to see every option possible.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-07-2016 01:17 PM

Okay. After 3-4 hours of reading I'm lost. I called dasa, and motoxperts and OCP
I spoke with Dan at dasa. We ran through what I do. He said port and keep everything stock.
I'd benefit from that being I'm 90%trail riding. No big valves no epoxy.
We talked about big bores. Said I could do it. Would be a noticeable difference.
Spoke with Ronnie. She was smart, definitely knew her shit. But I started to get into more tech questions that she just didn't want to give bad info on. Waiting for a return call from OCP.


Sent from my SAMSUNG-SM-G890A using Tapatalk

spinothalamic 10-07-2016 03:13 PM

Have you read this thread? It may atleast help hone in your b.s. filter when choosing who to send your head to for porting. https://www.yfzcentral.com/forum/32-y...echniques.html

Sheerider11 10-07-2016 06:59 PM

http://uploads.tapatalk-cdn.com/2016...bd642dd4bb.jpg

HOLY CRAP!! NEXT DAY ON THIS EXHAUST!!

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-08-2016 05:27 PM


Sheerider11 10-08-2016 05:29 PM

I stupidly burned my coolant hose on the pipe.
So I ordered these silicone hoses. I've had good luck with them on a dozen other bike before

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-10-2016 03:38 PM

Mmmmm. What's this sredrum throttle body boring?

Sent from my SAMSUNG-SM-G890A using Tapatalk

yfzrider82104 10-10-2016 05:20 PM

dont do big bore reliability goes down hill i feel like keep her strong running 450! i was gonna get that same exhaust but came up with money for the FMF 4.1, where are you located there is a place in in near west springfield MA called BCS powersports they did Hetricks engines few years ago when he was sponsored, great ppl, i had my YFZx done there runs like a bat outta hell for mild mods!

Sheerider11 10-10-2016 05:25 PM

Quote:

Originally Posted by yfzrider82104 (Post 2171290)
dont do big bore reliability goes down hill i feel like keep her strong running 450! i was gonna get that same exhaust but came up with money for the FMF 4.1, where are you located there is a place in in near west springfield MA called BCS powersports they did Hetricks engines few years ago when he was sponsored, great ppl, i had my YFZx done there runs like a bat outta hell for mild mods!

I'm in NJ.
I read more bad then good for the FMF on the R.
Yoshi has been proven to be the best and quietest exhaust for these bike. But if you know something I don't let me know.
I'll look into them. Just checking options now.

Sent from my SAMSUNG-SM-G890A using Tapatalk

yfzrider82104 10-10-2016 05:31 PM

i love mine, i had the factory GYTR on it but swapped to the FMF once i got the X that had a blown out 2bros pipe on it, big difference not loud and pulled harder than my buddies 14 with the yoshi pipe we swapped quads to compare.. but it will all depend on everything else you do that can get you the power when and where u did it! NJ is about 1.15min from me in NY but def look into BCS

kilroy 10-10-2016 07:53 PM

I'm curious what ecu and intake your running for the Yoshimura to be less powerful?...What condition was the bike fitted with the Yoshi in? Stock porting on both bikes?.... Both bikes dyno tuned...if not you're really aren't going to get a good comparison...

The FMF sticks out to far and has really cruddy fit and finish....I have owned both pipes but never used the FMF RCT.

Sheerider11 10-10-2016 10:57 PM

Quote:

Originally Posted by yfzrider82104 (Post 2171306)
i love mine, i had the factory GYTR on it but swapped to the FMF once i got the X that had a blown out 2bros pipe on it, big difference not loud and pulled harder than my buddies 14 with the yoshi pipe we swapped quads to compare.. but it will all depend on everything else you do that can get you the power when and where u did it! NJ is about 1.15min from me in NY but def look into BCS

Cool I'll look into them.
I was just curious as to what the local central Guys are running.
99% of the fast shops are pretty well talked about.
Mmad seems to be pretty well talked about. I'm going to give them call tomorrow and see what they have to say

Sent from my SAMSUNG-SM-G890A using Tapatalk

Sheerider11 10-10-2016 11:18 PM

Just got these beadlocks for 150 with the holeshots. There 18s, but what ever. I'll just play with gearing.

Sent from my SAMSUNG-SM-G890A using Tapatalk


All times are GMT -4. The time now is 12:24 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome