Yamaha YFZ450 Forum : YFZ450, YFZ450R, YFZ450X Forums - View Single Post - Spring Mod Full Tutorial
View Single Post
Old 05-09-2009, 08:57 AM   #15 (permalink)
Joester
Senior Member
 
Joester's Avatar
 
Join Date: Feb 2009
Location: High Ridge, outside St. Louis, MO
Posts: 2,347
Post

QUOTE (Fever2ride @ May 8 2009, 10:13 PM)
Quote:
I found this thru the search.. :D

This was EXACTLY what I was looking for!!! Acc pump adjustment, and leak jet adjustment.. I did a pump cover a while ago, but I'm pretty sure I didn't do the adjustments properly, if at all...

One question tho.. On the final pic of the Leak jet; what do I do with it? Replace the jet with the 35?


And I found out earlier, that it's easier to take the throttle cam cover off while the boots are still attached.. THat way the carb can't move too much.. Those two allen bolts were wicked tight for me..[/b]
yep, all you do its unscrew it and put in a 35 from your local dealer (if they have it..)

and the allen set i use is bulky (see picture) so i cant get in there, but if you have one of those sets that each wrench comes out individually then its probably easier to take that cover off first.
__________________
2007 YFZ450 Red/Gray - DMC Afterburner Comp full system - Pro Design Pro Flow intake and air filter - CP 12.75:1 piston - port work by Outlaw Innovations - Stage 2 HotCams - EHS Racing airbox lid - AC racing blackline nerfs - TAG metals black bumper - bent accelerator pump spring - Adjustable Fuel screw - Maxxis RAZRs all around - 15/38 gears

Joester is offline   Reply With Quote