|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
11-16-2011, 11:01 AM
|
#1 (permalink) |
|
Senior Member
Join Date: Aug 2006
Location: Kansas City, Missouri
Posts: 281
|
HID Install Question
When installing ddm's kit and also using the ricky stator. Can you remain using the stock handlebar switch?
i saw in another thread someone said something about a relay? Is that the relay for the low/high beams?
__________________
478 big bore kit,Full Dr.D exhaust,Stroker crank,Web cams,Ported And Polished Head, Air box delete, Full Hinson clutch,Nerf bars w heel guards, Pro armor bumpers, Jetted, Lonestar steering stem Retha bars, Asv shortly levers,Oil mod |
|
|
| Sponsored Links | |||
Advertisement | |||
|
11-17-2011, 09:31 AM
|
#2 (permalink) |
|
Senior Member
Join Date: Aug 2006
Location: Kansas City, Missouri
Posts: 281
|
No one?
__________________
478 big bore kit,Full Dr.D exhaust,Stroker crank,Web cams,Ported And Polished Head, Air box delete, Full Hinson clutch,Nerf bars w heel guards, Pro armor bumpers, Jetted, Lonestar steering stem Retha bars, Asv shortly levers,Oil mod |
|
|
|
|
11-17-2011, 10:44 AM
|
#3 (permalink) |
|
Senior Member
Join Date: Dec 2010
Location: 541 area
Posts: 170
|
Not sure if your ddm kit is a plug n play or hi/lo beam kit but I will tell you that when I installed my cheap ebay single beam hid kit I used a realay kit that I purchased with it($40 all together) so I could run everything through my original headlight switch. You can not just grab power from your headlight wires beacuse they are AC power adn the hid's need DC power. Its not hard to install the relay, you got a power adn a ground and two wires that power your hid's boxs and I took a taped into the blue wire from my tail light to power the relay.
|
|
|
|
|
11-17-2011, 10:43 PM
|
#4 (permalink) |
|
Senior Member
Join Date: Aug 2006
Location: Kansas City, Missouri
Posts: 281
|
Helloooooo
__________________
478 big bore kit,Full Dr.D exhaust,Stroker crank,Web cams,Ported And Polished Head, Air box delete, Full Hinson clutch,Nerf bars w heel guards, Pro armor bumpers, Jetted, Lonestar steering stem Retha bars, Asv shortly levers,Oil mod |
|
|
|
|
11-20-2011, 12:16 AM
|
#5 (permalink) |
|
Senior Member
Join Date: Dec 2008
Location: California
Posts: 544
|
i got the ddm kit too
i just tapped into the ground and low beam of the headlight plugs coming out of the harness and i can use my stock switch theyll turn on when you switch it to low
__________________
2007 YFZ450 
|
|
|
|
| Sponsored Links | |
Advertisement | |
 |
| Thread Tools | |
|
|
