YFZ Central banner

Clutch Lever Clamp Screws

961 views 1 reply 2 participants last post by  BobPeabody67 
#1 ·
I was adding protaper handguards and while in the process long story short I was tightening up the last bolt on the clamp for the clutch lever to the handle bars and broke the screw. Any one know the size or length or do I need to just hit the hardware store? Thanks
 
#2 ·
If you get one from a hardware store, you'll most likely have to get the wrong size head for the threads to work. That being said, if that doesnt bother you, hardware store. If it does, Yamaha Part# 90101-05033-00.

That part number is for a 2016 YFZR. It should be the same for all years assuming you have a YFZR and the stock perch.[ThumbsUp]
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top