Converting Your 04-05 To An 06 - Page 3 - Yamaha YFZ450 Forum : YFZ450, YFZ450R, YFZ450X Forums

davenportracing · 03-02-2009, 05:11 PM

QUOTE (davenportracing @ Mar 2 2009, 02:06 PM)

Quote:

no wont work i have a 07 and i have a 04 to 05 swing arm and my carrier out off my 07 wont work the 04 and 05 carrier is 87mm the 06 to 09 is 90mm[/b]

i have a lsr swingarm i want to sell pm me

cjphily · 10-25-2009, 02:45 PM

hey guys new to the forum, i was wondering if the 06 shock will bolt onto the 05 swing arm if you have all the 06 linkage?
thanks in advance!

newevolutionix · 03-08-2010, 10:57 AM

I was looking to trade a-arms but will +2 Houser from a 06 fit on a 05?

lengen8 · 10-25-2010, 06:09 PM

does any one know if you can put yfz450R a a arms on a 06 yfz

Scottrips27 · 03-09-2011, 11:36 AM

I'm new to yfz central I have a 05 yfz I was wondering if an 08 steering stem would work??

jljered · 03-09-2011, 12:02 PM

yep.. 08 stem will work... you just need to get a set of fat bars (1.125").. the 08 stem is setup for the bigger bars.. other then that, it will bolt right on..

Scottrips27 · 03-09-2011, 12:24 PM

I have a houser +1 steering stem wit the fat bar mounts would there be any difference in the length converting to a 08 stock stem?

jljered · 03-09-2011, 12:31 PM

if its a +1 for a 04-05 then it will only be 3/16ths of an inch taller then a 07-08.... in otherwords, putting a 08 stock stem on your 05 with a houser plus1 will make the bars lower by 3/16ths.. make sense?

Scottrips27 · 03-09-2011, 01:08 PM

Yeah thanks it makes sense the 08s are taller than a 05 I got it thanks a lot

steady streamin · 03-09-2011, 08:14 PM

so i could put a stock 08 on my 04 and it raise it up 13/16" and i would just have to get fat bars right?

jljered · 03-09-2011, 09:19 PM

you are correct.

peteRouz · 03-15-2011, 07:58 AM

Hi, can anyone tell me if a front custom axis from a yfz450 05 fit yfz450 2008 ?
And the rear shock? Maybe dont fit because of the linkage?

proflow · 03-16-2011, 02:15 AM

Looks like I should have read in here before buying a used 04' Lonestar +2 swingarm for my 06'.
I was hoping my carrier & linkage would swap over.
As I understand it, it does not, can anyone confirm this please ?
I really only wanted it for the +2, but now I'm not even sure if its longer or not ! (still in the mail).

Thanks---Proflow

cherrypink27 · 06-05-2011, 08:45 AM

hello,im glad to be here.

wangyin · 07-18-2011, 02:34 AM

You'll phone for to acquire one more brake hub and brake rotor. Havent gotten that in however but its a width alter for the hub as well as a bolt pattern alter for the rotor. will most in all probability be 100% optimistic these times when I get it in.

03-08-2010, 10:57 AM	#43 (permalink)
newevolutionix Senior Member Join Date: Jan 2008 Location: Olmsted Falls Posts: 254	I was looking to trade a-arms but will +2 Houser from a 06 fit on a 05? __________________ 05 YFZ Special Edition Yellow/Black.

03-09-2011, 12:02 PM	#46 (permalink)
jljered Senior Member Join Date: May 2010 Location: washington Posts: 1,433	yep.. 08 stem will work... you just need to get a set of fat bars (1.125").. the 08 stem is setup for the bigger bars.. other then that, it will bolt right on.. __________________ 2008 YFZ450; plus 2 houser stem; plus 2 i-shock a arms; ims roll design pegs; gpr steering stabilizer; 42 sredrum carb bore; works black widow shocks; dasa classic; plus 2.5 ace fab swingarm; ncvq needle; kenz cycle tech +1 head; web +5 cams; asv clutch and brake levers; 13.75 piston; boyesen pump cover; fci intake; rpm dominator plus 4 axle If there's one thing i hate.... it's everyting

03-09-2011, 12:31 PM	#48 (permalink)
jljered Senior Member Join Date: May 2010 Location: washington Posts: 1,433	if its a +1 for a 04-05 then it will only be 3/16ths of an inch taller then a 07-08.... in otherwords, putting a 08 stock stem on your 05 with a houser plus1 will make the bars lower by 3/16ths.. make sense? __________________ 2008 YFZ450; plus 2 houser stem; plus 2 i-shock a arms; ims roll design pegs; gpr steering stabilizer; 42 sredrum carb bore; works black widow shocks; dasa classic; plus 2.5 ace fab swingarm; ncvq needle; kenz cycle tech +1 head; web +5 cams; asv clutch and brake levers; 13.75 piston; boyesen pump cover; fci intake; rpm dominator plus 4 axle If there's one thing i hate.... it's everyting

03-09-2011, 09:19 PM	#51 (permalink)
jljered Senior Member Join Date: May 2010 Location: washington Posts: 1,433	you are correct. __________________ 2008 YFZ450; plus 2 houser stem; plus 2 i-shock a arms; ims roll design pegs; gpr steering stabilizer; 42 sredrum carb bore; works black widow shocks; dasa classic; plus 2.5 ace fab swingarm; ncvq needle; kenz cycle tech +1 head; web +5 cams; asv clutch and brake levers; 13.75 piston; boyesen pump cover; fci intake; rpm dominator plus 4 axle If there's one thing i hate.... it's everyting

03-16-2011, 02:15 AM	#53 (permalink)
proflow Junior Member Join Date: Mar 2011 Location: Buckley WA Posts: 9	Looks like I should have read in here before buying a used 04' Lonestar +2 swingarm for my 06'. I was hoping my carrier & linkage would swap over. As I understand it, it does not, can anyone confirm this please ? I really only wanted it for the +2, but now I'm not even sure if its longer or not ! (still in the mail). Thanks---Proflow __________________ 06' YFZ 450, Hot Rods crank, high comp. piston, Web cams, Twist throttle, GYTR Race pipe & cut slip-on, ESR air box eliminator & K&N w/outerwere. Nerf bars, Houser stem, G-Force axle, braided brake lines, front bumper, rear grab bar, Fat bars w/foldaway levers, ESR temp gauge w/silicone hoses, Pingle, Sidewinder chain. Sandstar & Holeshot front & rears, Helmet light, Etc..etc... Last edited by proflow; 03-16-2011 at 02:19 AM. Reason: added info

10-25-2009, 02:45 PM	#42 (permalink)
cjphily Member Join Date: Oct 2009 Posts: 42	hey guys new to the forum, i was wondering if the 06 shock will bolt onto the 05 swing arm if you have all the 06 linkage? thanks in advance!

10-25-2010, 06:09 PM	#44 (permalink)
lengen8 Junior Member Join Date: Oct 2010 Posts: 3	does any one know if you can put yfz450R a a arms on a 06 yfz

03-09-2011, 11:36 AM	#45 (permalink)
Scottrips27 Member Join Date: Mar 2011 Location: Jersey Posts: 61	I'm new to yfz central I have a 05 yfz I was wondering if an 08 steering stem would work??

03-09-2011, 12:24 PM	#47 (permalink)
Scottrips27 Member Join Date: Mar 2011 Location: Jersey Posts: 61	I have a houser +1 steering stem wit the fat bar mounts would there be any difference in the length converting to a 08 stock stem?

03-09-2011, 01:08 PM	#49 (permalink)
Scottrips27 Member Join Date: Mar 2011 Location: Jersey Posts: 61	Yeah thanks it makes sense the 08s are taller than a 05 I got it thanks a lot

03-09-2011, 08:14 PM	#50 (permalink)
steady streamin Member Join Date: Feb 2011 Posts: 60	so i could put a stock 08 on my 04 and it raise it up 13/16" and i would just have to get fat bars right?

03-15-2011, 07:58 AM	#52 (permalink)
peteRouz Junior Member Join Date: Oct 2010 Posts: 3	Hi, can anyone tell me if a front custom axis from a yfz450 05 fit yfz450 2008 ? And the rear shock? Maybe dont fit because of the linkage?

06-05-2011, 08:45 AM	#54 (permalink)
cherrypink27 Junior Member Join Date: Jun 2011 Location: aventura FL Posts: 1	hello,im glad to be here. __________________ check this out989803139301

07-18-2011, 02:34 AM	#55 (permalink)
wangyin Junior Member Join Date: Jul 2011 Posts: 6	You'll phone for to acquire one more brake hub and brake rotor. Havent gotten that in however but its a width alter for the hub as well as a bolt pattern alter for the rotor. will most in all probability be 100% optimistic these times when I get it in. __________________ Cheap Polo Shirts Wholesale Ralph Lauren Polo Shirts Ralph Lauren Polo Shirts Sale

Remove Advertisements Sponsored Links
YFZCentral.com Advertisement