whats wrong with this pic? yfz450 alignment

[wood9781]

Ok, I had +2 a arms on this quad I sold them and I put stock a arms on it now this is what is looks like. The tire on the right is leaning in at the top bad. how do I fix this or what do I look for that might be bent? Ive looked at the arms and spindles and they look fine. There is no adjustment on the arms. its on a 06 yfz450.
thanks

[N1CK N1TRO]

That's all to do with ur shock or ur top arm

[N1CK N1TRO]

bby the pics it looks like ur ride height is different on the shocks with the threads

[oldschoolandrew]

Aren't you running a long travel shock with a-arms that are standard length?

[wood9781]

the shock meassure 16 and 5/8 from eye let to eye let.
the top of the shock looks the same, It doesnt in the pic though.
If I tighting up the spring the tire should come in some shouldnt? lol

[Terse]

If those shocks are valved and sprung for the +2 arms then they aren't compressing enough to allow the arms to lay lower. If they will lay lower then the top of the tire will move outward more.

I'm not saying that this will fix your problem.....

[ctown208]

I would set the front shocks preload way softer. Lossen up the retainer ring and screw it up reared the shock top. Looks way high, that will lower it.

[wood9781]

'k ill try to adjust the shock today.

[wood9781]

found the problem it was a bent spindle. thanks for all the help guys.