Who has the Blaster fi installed? - Yamaha YFZ450 Forum : YFZ450, YFZ450R, YFZ450X Forums

yfz1211 · 12-29-2011, 02:04 PM

Just got a blaster fi for my 09 and got it all together with the bracket that goes over the filter took a second look and realized I will have to unbolt the fenders to get the bracket out to then get the filter out for matinence. Is there a better way to mount this? I'm using the stock air box

john jr · 12-29-2011, 02:23 PM

Only takes a minute to get my MSD removed. But I can slide my filter out the back since I went with no air box.

eagertorace · 12-30-2011, 02:27 AM

the msd bracket slides under your plastics....no need to take the fenders loose

yfz1211 · 12-30-2011, 09:40 AM

It doesn't slide under my plastics I might be able to just rip it out of there if I bend the tab up a little that sits over it I just stuck it in the back of the air box for now

bbcmudtruck · 12-30-2011, 10:36 AM

It should slide loose unless you bolted it down?

fastone · 02-22-2012, 02:43 AM

Stuck mine in the tool pocket my seat pushed it on my filter. no paddles still fast!!!!!!!

12-29-2011, 02:04 PM	#1 (permalink)
yfz1211 Member Join Date: Mar 2007 Posts: 60	Who has the Blaster fi installed? Just got a blaster fi for my 09 and got it all together with the bracket that goes over the filter took a second look and realized I will have to unbolt the fenders to get the bracket out to then get the filter out for matinence. Is there a better way to mount this? I'm using the stock air box

12-29-2011, 02:23 PM	#2 (permalink)
john jr Senior Member Join Date: Aug 2010 Location: Brookings, OR Posts: 185	Only takes a minute to get my MSD removed. But I can slide my filter out the back since I went with no air box. Attached Thumbnails __________________ 2010 450R SE - Barker Exhaust, MSD, FCI no air box, 08 Cam, Tusk full Nerfs, DWT .125 Wheels, Skat-Trac 21x12x8 6 Paddle Extremes. http://youtu.be/RV8LqZJW6TU Winchester Bay Ride

12-30-2011, 02:27 AM	#3 (permalink)
eagertorace Senior Member Join Date: Mar 2008 Location: KENTUCKY !! Posts: 522	the msd bracket slides under your plastics....no need to take the fenders loose __________________ KCCR 2010 yfz/x BB edition...GONE KTM 505SX Gtthunder....

12-30-2011, 10:36 AM	#5 (permalink)
bbcmudtruck Moderator Join Date: Mar 2008 Location: Northwest Missouri Posts: 1,734	It should slide loose unless you bolted it down? __________________

02-22-2012, 02:43 AM	#6 (permalink)
fastone Junior Member Join Date: Feb 2012 Posts: 2	Stuck mine in the tool pocket my seat pushed it on my filter. no paddles still fast!!!!!!! Last edited by fastone; 02-22-2012 at 02:47 AM.

12-30-2011, 09:40 AM	#4 (permalink)
yfz1211 Member Join Date: Mar 2007 Posts: 60	It doesn't slide under my plastics I might be able to just rip it out of there if I bend the tab up a little that sits over it I just stuck it in the back of the air box for now

Remove Advertisements Sponsored Links
YFZCentral.com Advertisement